Norma
EN12209
Dig. 1
CATEGORY OS USE
Class 1
for use by people with a high incentive to exercise care and with a small chance of misuse, e.g. residential doors
Class 2
for use by people with some incentive to exercise care but where there is some chance of misuse, e.g. office doors
Class 3
for use by the public where there is little incentive to exercise care and where there is a high chance of misuse, e.g. doors in public buildings
DIG. 2
DURABILITY
A
50.000 test cycles, no load on latch bolt
B
100.000 test cycles, no load on latch bolt
C
200.000 test cycles, no load on latch bolt
F
50.000 test cycles, 10 N load on latch bolt
G
100.000 test cycles, 10 N load on latch bolt
H
200.000 test cycles, 10 N load on latch bolt
L
100.000 test cycles, 25 N load on latch bolt
M
200.000 test cycles, 25 N load on latch bolt
R
100.000 test cycles, 50 N load on latch bolt
S
200.000 test cycles, 50 N load on latch bolt
W
100.000 test cycles, 120 N load on latch bolt
X
200.000 test cycles, 120 N load on latch bolt
DIG. 3
DOOR MASS AND CLOSING FORCE
1
up to 100kg door measure, 50 N maximum closing force
2
up to 200kg door measure, 50 N maximum closing force
3
above 200kg door measure, 50 N maximum closing force
4
up to 100kg door measure, 25 N maximum closing force
5
up to 200kg door measure, 25 N maximum closing force
6
above 200kg door measure, 25 N maximum closing force
7
up to 100kg door measure, 15 N maximum closing force
8
up to 200kg door measure, 15 N maximum closing force
9
above 200kg door measure, 15 N maximum closing force
DIG. 4
FIRE RESISTANCE
0
not approved for use on fire/ smoke resisting door assemblies
1
suitable for use on fire/smoke resisting door assemblies, subject to satisfactory assessment of the contribution of the lock or latch to the fire resistance of specified fire/smoke resisting door assemblies. Such assessment is beyond the scope of this European Standard
DIG. 5
SAFETY
0
no safety requirements
DIG. 6
CORROSION AND TEMPERATURE RESISTANCE
0
no defined corrosion resistance, no temperature requirement
A
low corrosion resistance, no temperature requirement
B
moderate corrosion resistance, no temperature requirement
C
high corrosion resistance, no temperature requirement
D
very high corrosion resistance, no temperature requirement
E
moderate corrosion resistance, temperature requirement: from –20 °C to +80 °C
F
high corrosion resistance, temperature requirement: from –20 °C to +80 °C
G
very high corrosion resistance, temperature requirement: from –20 °C to +80 °C
DIG. 7
SECURITY AND DRILL RESISTENCE
1
minimum security and no drill resistance
2
Low security and no drill resistance
3
medium security and no drill resistance
4
high security and no drill resistance
5
high security with drill resistance
6
very high security and no drill resistance
7
very high security with drill resistance
DIG. 8
FIELS OF DOOR APPLICATION
A
mortice lock, unrestricted application
B
mortice lock, highed door
C
mortice lock, sliding door
D
rim lock, unrestricted application
E
rim lock, hinged door
F
rim lock, sliding door
H
mortice lock, hinged door, supported
J
rim lock, hinged door, inwards
K
mortice lock, hinged door, locked from inside
L
mortice lock, sliding door, locked from inside
M
rim lock, hinged door, locked from inside
N
rim lock, sliding door, locked from inside
P
mortice lock, hinged door, supported, locked from inside
R
rim lock, hinged door, inwards, locked from inside
S
mortice lock, unrestricted application, locked from inside
T
rim lock, unrestricted application, locked from inside
DIG. 9
TYPE OF KEY OPERATION AND LOCKING
D
lever lock or latch, manually locking
E
lever lock or latch, automatically locking
F
lever lock or latch, manually locking with intermediate locking
G
lock or latch without key operation, manually locking
H
lock without key operation, automatically locking
0
not apllicable
A
cylinder lock or latch, manually locking
B
cylinder lock or latch, automatically locking
C
cylinder lock or latch, mmanually locking with intermediate locking
DIG. 10
TYPE OF SPINDLE OPERATION
0
lock or latch witout follower
1
lock or latch for knob or sprung lever handle operation
2
lock or latch for unsprung lever handle operation
3
lock or latch for heavy duty unsprung lever handle operation
4
lock or latch for heavy duty unsprung lever handle operation specified by the manufacturer
DIG. 11
KEY IDENTIFICATION
0
no requitements
A
minimum three detaining elements
B
minimum five detaining elements
C
minimum five detaining elements,extended number of effective differs
D
minimum six detaining elements
E
minimum six detaining elements,extended number of effective differs
F
minimum seven detaining elements
G
minimum seven detaining elements,extended number of effective differs
H
minimum eight detaining elements,extended number of effective differs
NORMA
EN1125
DIG. 1
CATEGORY OS USE
3
high frequency of use by public and others with little incentive to exercise care, i.e. where is a chance of accident occurring and of misure
DIG. 2
DURABILITY
6
100 000 test cycles
7
200 000 test cycles
DIG. 3
DOOR MASS
5
up to 100 kg door measure
6
up to 200kg door measure
7
above 200kg door measure
DIG. 4
FIRE RESISTANCE
0
not approved for use on fire/ smoke door assemblies
A
suitable for use on smoke door assemblies, subject to satisfactory assessment of the contribution of the panic/ emergency device to the smoke resistance of specified smoke door assemblies
B
suitable for use on fire/smoke door assemblies, subject to satisfactory assessment of the contribution of the panic/ emergency device to the fire resistance of specified fire/smoke door assemblies.
DIG. 5
SAFETY
1
All panic devices have a critical safety function therefore only the top grade - 1 – is identified
DIG. 6
CORROSION
3
high resistance (96 salt spray hours)
4
very high resistance (240 salt spray hours)
DIG. 7
SECURITY
2
1 000 N
DIG. 8
PROJECTION OF THE DEVICE
1
projeção até 150mm (projeção grande)
2
projeção até 100mm (projeção normal)
DIG. 9
TYPE OF DEVICE
A
panic device with push bar operation
B
panic device with touch bar operation
DIG. 10
FIELS OF DOOR APPLICATION
A
outward opening - Single & double exit doors; active & inactive leaf
B
outward opening - Single exit door only
C
outward opening – double exit door; inactive door
NORMA
EN179
DIG. 1
CATEGORY OS USE
3
for use by people with a high incentive to exercise care and with a small chance of misuse - keys shall resist a torque of 2,5Nm and still be sable
DIG. 2
DURABILITY
6
100.000 cycles
7
200.000 cycles
DIG. 3
DOOR MASS AND CLOSING FORCE
5
up to 100 kg
6
up to 200 kg
7
over 200 kg
DIG. 4
FIRE RESISTANCE
0
not approved for use on fire resistant / smoke control door assemblies
A
suitable for use on smoke control door assemblies
B
suitable for use on fire resistant smoke control door
DIG. 5
SAFETY
1
all panic closure devices have a very important personnel safety function, therefore only the highest degree - 1 - is identified
DIG. 6
CORROSION AND TEMPERATURE RESISTANCE
A
high corrosion resistance (96h), no temperature requirement
B
no corrosion resistence requirement: resistence -25/65ºC temperature extremes
DIG. 7
KEY RELATED SECURITY
2
300 Min. number of effective differs / 3 Min. number of movable detainers.
3
15 000 Min. number of effective differs / 5 Min. number of movable detainers.
4
30 000 Min. number of effective differs / 5 Min. number of movable detainers.
5
30 000 Min. number of effective differs / 6 Min. number of movable detainers.
DIG. 8
Projeção do equipamento
1
projeção até 150mm (projeção grande)
2
projeção até 100mm (projeção normal)
A
dispositivo de fecho de emergência com acionamento por “muleta de puxador
B
dispositivo de fecho de emergência com acionamento por “placa de empurrar
DIG. 9
Tipo de acionamento do equipamento
A
dispositivo de fecho antipânico acionado por “barra de alavanca
B
dispositivo de fecho antipânico acionado por “barra de pressão
DIG. 10
Campo de aplicação
A
abertura para o exterior - Porta de 1 folha, porta de 2 folhas; folha ativa ou inativa
B
abertura para o exterior - Apenas porta de 1 folha
C
abertura para o exterior - Porta de 2 folhas, apenas a folha inativa
Norma
EN1303
DIG. 1
CATEGORY OS USE
1
for use by people with a high incentive to exercise care and with a small chance of misuse - keys shall resist a torque of 2,5Nm and still be sable
DIG. 2
DURABILITY
4
25.000 cycles
5
50.000 cycles
6
100.000 cycles
DIG. 3
DOOR MASS AND CLOSING FORCE
DIG. 4
FIRE RESISTANCE
0
not approved for use on fire resistant / smoke control door assemblies
A
suitable for use on smoke control door assemblies
B
suitable for use on fire resistant smoke control door
DIG. 5
SAFETY
sem requisito
DIG. 6
CORROSION AND TEMPERATURE RESISTANCE
0
no corrosion or temperature resistence requirements
A
high corrosion resistance (96h), no temperature requirement
B
no corrosion resistence requirement: resistence -25/65ºC temperature extremes
C
high corrosion resistance (96h), -25/65ºC temperature extremes
DIG. 7
KEY RELATED SECURITY
1
100 Min. number of effective differs / 2 Min. number of movable detainers
2
300 Min. number of effective differs / 3 Min. number of movable detainers.
3
15 000 Min. number of effective differs / 5 Min. number of movable detainers.
4
30 000 Min. number of effective differs / 5 Min. number of movable detainers.
5
30 000 Min. number of effective differs / 6 Min. number of movable detainers.
6
100 000 Min. number of effective differs / 6 Min. number of movable detainers.
DIG. 8
ATTACK RESISTENCE
0
no resistance against drilling; no resistance against mechanical attack.
A
3/5 min resistance against drilling; resistance against mechanical attack except plug/cylinder extraction.
B
5/10 min resistance against drilling; resistance against mechanical attack except plug/cylinder extraction
C
3/5 min resistance against drilling; resistance against mechanical attack.
D
5/10 min resistance against drilling; resistance against mechanical attack.